Browse our equipment

POWER REPEATER 12V

Switch with Bottom Box

Technical Details Manufacturer ‎Greethga Part Number ‎500740530 Product Dimensions ‎10 x 9 x 4 cm Manufacturer reference ‎500740530 Item Package Quantity ‎1 Guaranteed software updates until ‎unknown

Switch waterproof（NO,NC）

ICS Surface, High Traffic, Green Dome Exit Button, Engraved Base SKU: 10637510 | Part No: DRB004S-PTE Key Features Surface High impact Green dome button Stainless Steel Engraved

FC-8396H 5-inch face machine plastic

FC-8200H 7-inch fingerprint face machine,

FC-8890H 8-inch fingerprint face machine, waterproof

Main Uses: Access Control, Time Attendance, Video Intercom, Elevator Control, Cabinet Lock Working Voltage: DC12V（9 ~ 14V） Working Current: <2000mA Working Environment: Temperature: -30℃～65℃； Humidity: 10 ~ 90%, RH Operating System: LINUX System User Capacity: 20,000 Faces; 20,000 QR Codes; 20,000 Cards; 20,000 Passwords; 10,000 Fingerprints; Record Capacity: 1 Million Records; 10,000 Recording Photos; 10,000 System Records Recognition Distance: 0.3m-3m Recognition Speed: < 0.3S Material: ABS Plastic Casing+Tempered Glass Panel Size: 215×112×25mm Weight: 0.6KG Elevator Expansion: Support for Elevator and Cabinet Lock Algorithm: Face Recognition, Fingerprint Identification, Palm Vein Recognition, QR Code Verification Management Mode: Touch Screen, Desktop Software, Cloud Software, Mobile App Registration Methods: Face, Fingerprint, Palm Vein, Password, Mifare Card, Dual Frequency Card Optional (ID Card and Mifare Card) Comparison Mode: 1:N/1:1 Firmware Upgrade: Software OTA Upgrade or USB Flash Drive Upgrade Camera: Wide Dynamic Binocular 2 Megapixel HD Camera Display Screen: 8-inch ISP Full-view HD Screen Storage: 256M DDR3 Memory, 8GB EMMC Storage Communication: TCP/IP, WIFI, 4G(Customized), Wiegand26/34/66 Other Interfaces: Exit Button x1, Door Sensor x1, Fire Input x1, Alarm Output x1, Wiegand Output x1, Wiegand Input x1, Magnetic Lock Control x1, USB x1, RS485 x1 Installation Ways: Wall Mounted or Installed on the Turnstile

Product 79G Millimeter Wave Vehicle radar Detector

Minor customization Drawing-based customization Sample-based customization Full customization Key attributes Access contol type Automatic induction Barrier open/close time self-setup Communication Interface Blue-tooth Operation Direction 1-Way Place of Origin Guangdong, China barrier motor Brushed Motor

20M UHF RFID Reader UHF-202420

Product Parameter Parameter Descr1ption S4A Model UHF-202420 Product Name UHF RFID Long Range Card Reader Dimension 260x260x70mm Recognition distance Up to 20 meters Default communication interface Wiegand26, Wiegand34, RS485 Option customized RS232,RJ45 ( Ethernet ), WiFi, Relay System parameters ARM7 Working frequency National standard (920~925MHz) American standard(902-928MHz) European standard (865-868MHz) Other multinational frequency standards (customized) Group reading performance <200 tags Tag protocol Support IS01 8000-6B, IS018000-6C (EPC GEN2) protocol electronic tags Frequency hopping mode Broad spectrum frequency hopping FHSS) or fixed frequency, can be set by software; Working mode Active mode, response mode, passive mode, etc. RF power 0-33dBm (power software adjustable) Antenna parameters 9dBi linear polarization antenna (built-in) Working voltage +12V Recognition prompt Buzzer or LED flashing Power consumption <12W Working temperature -20℃ ～ +70℃ (customization required if out of range) Working humidity 20％ ～ 95％ (no condensation) Storage temperature -40℃ ～ +125℃ Appearance/packaging size 260*260*70mm/ 355*260*80mm Net weight 2400G Gross weight 3700KG Secondary development Provide dynamic link library (DLL) and demonstration software source code to support secondary development. Remarks The recognition distance and group reading performance depend on the tag performance and specific application scenarios, and can be customized as required

15M UHF RFID Reader

Product Parameter Parameter Descr1ption S4A Model UHF-202415 Product Name UHF RFID Long Range Card Reader Dimension 180x180x60mm Recognition distance Up to 15 meters Default communication interface Wiegand26, Wiegand34, RS485 Option customized RS232,RJ45 ( Ethernet ), WiFi, Relay System parameters ARM7 Working frequency National standard (920~925MHz) American standard(902-928MHz) European standard (865-868MHz) Other multinational frequency standards (customized) Group reading performance <200 tags Tag protocol Support IS01 8000-6B, IS018000-6C (EPC GEN2) protocol electronic tags Frequency hopping mode Broad spectrum frequency hopping FHSS) or fixed frequency, can be set by software; Working mode Active mode, response mode, passive mode, etc. RF power 0-33dBm (power software adjustable) Antenna parameters 9dBi linear polarization antenna (built-in) Working voltage +12V Recognition prompt Buzzer or LED flashing Power consumption <12W Working temperature -20℃ ～ +70℃ (customization required if out of range) Working humidity 20％ ～ 95％ (no condensation) Storage temperature -40℃ ～ +125℃ Appearance/packaging size 260*260*70mm/ 355*260*80mm Net weight 2400G Gross weight 3700KG Secondary development Provide dynamic link library (DLL) and demonstration software source code to support secondary development. Remarks The recognition distance and group reading performance depend on the tag performance and specific application scenarios, and can be customized as required

PD-132 Single Vehicle Loop Detector

■ Install Detector The detector must be installed in a convenient weatherproof location as close to the loop as possible. Installation location must choose to stay away from the heat source, it around other devices must maintain a distance of at least 10mm (mustn’t fix cling to the cabinet). A correct loop configuration and detector installation will ensure a successful inductive loop detection system. Loop of several important parameters include: loop figure, size, and turns, install methods (details as “Loop installation guide”). ■ Wiring Diagram PCD-132 Diagram.jpg ■ Operation and Indication While the detector is tuning, the green Channel LED and red Power LED will be turn on. It remain about 2 seconds, then the green LED turn off. If a loop fault exists the Channel LED will come on and flash indicating a fault. If the fault is self-healing the detector will continue to operate. The green channel LED will also glow whenever a vehicle is detected passing over the inductive loop. The red Power LED at the top of the unit will remain on to indicate that the unit is powered. ■ Frequency To eliminate interference of two neighbouring wire loops or loop detectors, the frequency can be altered. PD132 Frequency.jpg ■ Sensitivity The sensitivity of the detector allows the detector to be selective as to the change of inductance necessary to produce an output. There are four sensitivity selections and are set as follows by DIP3 and DIP4 Switch. PD132 Sensitivity.jpg ■ Automatic Sensitivity Boost Automatic sensitivity boost is selected by DIP5 switch on the front of the enclosure and is set as follows: OFF - Disabled, ON – Enabled. Automatic sensitivity boost causes the sensitivity to be boosted to a maximum on detection on the vehicle, and maintained at this level during the presence of the vehicle over the loop. When the vehicle departs the loop and detection is lost the sensitivity reverts to the pre-selected level. ■ Filter To eliminate interference of bad environment, the filter mode is activated by setting the DIP6 Switch to “ON” site. In filter mode, the reaction time of the detector is delayed, and the sensitivity is reduced. Usually, the filter mode is disabled by setting the DIP6 Switch to “OFF” site. 【Attention】 If the detector isn’t working normally, you must check the loop and wiring at first, and then alter the frequency or the sensitivity. At last ,try to set it to filter mode. ■ Output Relay The relay2 is pulse output. If DIP7 is “OFF” site, when a vehicle is detected passing over the inductive loop, the relay is energized( Pin3 and Pin4 is shorted) and de-energized ( Pin3 and Pin4 is opened) after 500ms. If DIP7 is “ON” site, when a vehicle is detected departing the loop, the relay is energized ( Pin3 and Pin4 is shorted) and de-energized ( Pin3 and Pin4 is opened) after 500ms. The relay1 is presence output. When a vehicle is detected passing over the inductive loop, the relay is energized( Pin5 and Pin6 are shorted) until the vehicle is detected departing the loop. ■ Presence Time The presence time may be set to permanent presence or to limited presence. In permanent presence mode the detector will continuously compensate for all environmental changes whilst there is a vehicle present over the loop, the presence mode is set with DIP8 Switch and is configured as follows: OFF：Limited Presence ( 5 minutes), ON：Permanent Presence. ■ Reset Switch The detector automatically tunes to the inductive loop connected to it when the power is applied, whether on initial installation or after any break in power supply. Should it be necessary to retune the detector, as may be required after changing any of the switches or after moving the detector from one installation to another, momentary operation of the RESET switch will initiate the automatic tuning cycle. ■ Technical Data Product Parameter Parameter Descr1ption S4A Model PD-132 Product Name Single Vehicle Loop Detector Supply voltage 230V AC , 115V AC, 12/24V DC/AC ( See the label on the detector) Voltage tolerance AC +10% / -15%; Voltage tolerance DC ±15% Power Consumption 4.5VA Output relays 120V/3A AC Operating temperature -20°C to +65°C Storage temperature -40°C to +85°C Frequency range 20 kHz to 170 kHz Reaction time 10ms Signal holding time Unlimited / limited when loop is permanently covered 5 minutes Sensitivity Adjustable in 4 increments Loop inductance Total loop plus connection wiring 50 to 1000μH.Ideal is 100 to 300μH Loop connection wiring Maximum length 20 meters, twisted at least 20 times per meter Size of Housing 78x40x108 mm (L x W x H)

PD-110B Single Vehicle Door Detector

PD-110B Single Vehicle Door Detector its working principle is that the metal parts of the vehicle will Change the inductance of the detection loop through the microcontroller An analysis is performed to determine if the vehicle exists. Mainly used For controlling electric doors, quick doors, barriers, and Involving a field requiring the presence detection of a vehicle Together. Featurer: > Industrial grade design, superior anti-interference ability and stability. > Adjustable Multi-level sensitivity to meet various needs. > Support multiple output interfaces to adapt to different scenarios. > Support loop coil self diagnosis checking. > Working with boom barrier gate, it can realize gate automatic close after vehicle passes. > Support for environmental drift compensation. Product Parameter Parameter Descr1ption S4A Model PD-110B Product Name Single Vehicle Door Detector Power supply AC220V/50Hz 4.5W Sensitivity 3 levels adjustable (low, medium, high) Reaction time 35ms Working frequency One level adjustable Maximum coil 8Mx1M Size 112x73x38mm Output method Relay Probe lead Within 10 meters Delay function Three-stage delay adjustable (1st gear 0.7s)

UHF-05USB UHF USB Desktop Reader and Writer

UHF-05 is a high performance UHF RFID desktop Reader. It is designed upon fully self-intellectual property. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, attendance system, anti-counterfeit and industrial production process control system. Features: 1 Self-intellectual property; 2 Support ISO18000-6C(EPC C1G2) , ISO18000-6B protocol tag; 3 860~868MHz, 902~928MHz frequency band(frequency customization optional); 4 FHSS or Fix Frequency transmission; 5 RF output power up to 13dbm(adjustable); 6 No external power source needed; 7 Built-in antenna with effect distance up to 200mm*; 8 Support USB2.0 interface with VSP(Virtual Serial Port) or HID mode; 9 Slim outline; 10 Provide SDK and demo software to facilitate further development. * Effective distance depends on protocol, tag and environment.

Exit Sign Metal Scrap

Enter Sign Metal Scrap

STOP Sign

Metal Exit Button

Metal Exit Button

Stainless steel exit button Vertical

Power Supply for Access Control Board

> Input Voltage: AC220V > Input Frequency: 50Hz > Output Voltage: DC9V~16V > Output Current: 5A Brand:S4A Item NO.:ACB-PS08

Access control power box 12V

Access control power box 12V 3A 5A access control special power supply, uninterruptible power supply > Input Voltage: AC180~235V > Input Frequency: 50Hz > Output Voltage: DC12V; NO/NC > Output Current: 5A > Optional: Remote Control Interface

UHF PLASTIC CARD (credit card size)

UHF PLASTIC CARD (credit card size)

VEHICLE PLATE TAG UHF HWP-C6CPIQAG

Operating Frequency: 865 - 867 MHz Communication Protocol: ISO 18000-63 and EPCglobal Gen2v2 Read Range: Up to 10m Chip Type: Impinj Monza 4QT EPC Memory: 96 bits

UHF CARD READER (USB) HWP-AIMW02CIQAG

Operating mode: HWP-AIMW02CIQAG 808 Transmitter Device can continuously transmit low-frequency 125 KHz signals to form a cover zone. Any low-frequency 125k tag entering the cover zone will receive a low-frequency ID code. The device can analyze the information such as the RSSI value of the low frequency signal strength, tag battery voltage status, and tag anti-dismantle status, etc. Then it replies the detailed information to the locating base station with 2.4GHz signal. 808 transmitter device can also receive the signal from the active single-frequency tag in real time and transmit the received data to the supervisory control system. In special applications, the data of the tags can also be written or the parameters can be changed. Recognition range: The effective recognition distance of the transceiver device is 10 cm, and the transmitting distance of 125K signal is 25 cm~95 cm. The distance can be controlled by adjusting parameters. 808 transmitting device can recognize the electronic tag signal in all directions. Recognition speed & capability: Recognition speed mainly depends on the time interval of the tag transmitting. 808 transmitter device can send the tag data to the computer without any delay after receiving it. If the tag is a read-write type, 808 transmitter device can also write relevant information into the tag. Capacity depends on the tag itself. Communication security: When the 808 transmitter device communicates with the tag, special communication protocol is used to verify the legitimacy of the device. In order to prevent data cracking, the meticulous encryption algorithm is developed to ensure data security in the communication process. Reliability: The product fully considers the application requirements of industrial environment such as anti-impact. The production process of the base station strictly conforms to the ISO 9001 quality standard. Multi-step quality inspection is implemented to ensure products with full performance requirements. Interface standard: 808 transmitter device provides USB2.0 standard hardware interface. If RS232 interface is required, please mark out when ordering. Agreement & Support: Standard software interface that conforms to Windows operating system environment is provided. The underlying communication protocol, related SDK development kits, DEMO soft wares and some development cases can be provided for reference.

HDMI Cable 4K60hz from 1.5m up to 60 m

Push Button

No Touch Button

Beam Detector

maximumu 10 meters

Beam Sensor

maximum 5 meters

Waterproof Active 4+1 PoE Extender 1000Mbps

Feature ♦ 4*10/100/1000Mbps RJ45 port supply port, 1*10/100/1000Mbps RJ45 receiving port ♦ 4*IEEE802.3af/at/bt (PoE) powered port output ♦ Max power supply : the whole power is 90W; Output power of single port max 60W ♦ Max Distance : support VLAN ♦ Waterproof level IP65, used for outdoor

Cable Manamgment Pipe

Tray Channel 16x16

Tray Channel 40x25

Tray Channel 25x25

ID + IC Braclet Tag

NFC Card

NFC Card

ID Card + HID id card

ID Card + HID id card

IC Card High Quality

IC Card High Quality